1、查看
iptables -nvL –line-number

-L 查看当前表的所有规则,默认查看的是filter表,如果要查看NAT表,可以加上-t NAT参数
-n 不对ip地址进行反查,加上这个参数显示速度会快很多
-v 输出详细信息,包含通过该规则的数据包数量,总字节数及相应的网络接口
–line-number 显示规则的序列号,这个参数在删除或修改规则时会用到

2、添加
添加规则有两个参数:-A和-I。其中-A是添加到规则的末尾;-I可以插入到指定位置,没有指定位置的话默认插入到规则的首部。

当前规则:

[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    DROP       all  --  192.168.1.1          0.0.0.0/0
2    DROP       all  --  192.168.1.2          0.0.0.0/0
3    DROP       all  --  192.168.1.4          0.0.0.0/0

添加一条规则到尾部:

[root@test ~]# iptables -A INPUT -s 192.168.1.5 -j DROP

再插入一条规则到第三行,将行数直接写到规则链的后面:

[root@test ~]# iptables -I INPUT 3 -s 192.168.1.3 -j DROP

查看:

[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    DROP       all  --  192.168.1.1          0.0.0.0/0
2    DROP       all  --  192.168.1.2          0.0.0.0/0
3    DROP       all  --  192.168.1.3          0.0.0.0/0
4    DROP       all  --  192.168.1.4          0.0.0.0/0
5    DROP       all  --  192.168.1.5          0.0.0.0/0

可以看到192.168.1.3插入到第三行,而原来的第三行192.168.1.4变成了第四行。

3、删除
删除用-D参数

删除之前添加的规则(iptables -A INPUT -s 192.168.1.5 -j DROP):

[root@test ~]# iptables -D INPUT -s 192.168.1.5 -j DROP

有时候要删除的规则太长,删除时要写一大串,既浪费时间又容易写错,这时我们可以先使用–line-number找出该条规则的行号,再通过行号删除规则。

[root@test ~]# iptables -nv --line-number
iptables v1.4.7: no command specified
Try `iptables -h' or 'iptables --help' for more information.
[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    DROP       all  --  192.168.1.1          0.0.0.0/0
2    DROP       all  --  192.168.1.2          0.0.0.0/0
3    DROP       all  --  192.168.1.3          0.0.0.0/0

删除第二行规则

[root@test ~]# iptables -D INPUT 2

4、修改
修改使用-R参数

先看下当前规则:

[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    DROP       all  --  192.168.1.1          0.0.0.0/0
2    DROP       all  --  192.168.1.2          0.0.0.0/0
3    DROP       all  --  192.168.1.5          0.0.0.0/0

将第三条规则改为ACCEPT:

[root@test ~]# iptables -R INPUT 3 -j ACCEPT

再查看下:

[root@test ~]# iptables -nL --line-number
Chain INPUT (policy ACCEPT)
num  target     prot opt source               destination
1    DROP       all  --  192.168.1.1          0.0.0.0/0
2    DROP       all  --  192.168.1.2          0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0

第三条规则的target已改为ACCEPT。

自由转载,转载请注明: 转载自WEB开发笔记 www.chhua.com

本文链接地址: iptables查看、添加、删除规则 http://www.chhua.com/web-note5491

随机笔记

更多